Usage; Description Of The Machine; Water Supply - Lavorwash Rio-R Bedienungsanleitung

WARNING:
•22 To ensure machine safety, use
only original spare parts from the manufacturer
or approved by the manufacturer.
WARNING:
•23 Do not direct the jet against
yourself or others in order to clean clothes or
foot-wear.
WARNING:
•24a
backflow preventers is considered to be non-
potable.
WARNING:
•25
nected from its power source during cleaning or
maintenance and when replacing parts or when
converting the machine to another function.
WARNING:
•26
can be dangerous. If an extension cord is used,
it must be suitable for outdoor use, and the con-
nection must be kept dry and clear of the ground.
It is recommended that this be done using a cable
reel that holds the plug at least 60 mm from the
ground.
WARNING:
•27
the plug and socket must be of watertight con-
struction.
WARNING:
•28
sure cleaners, aerosols may form. Inhalation of
aerosols can be dangerous to health.
WARNING:
•29
tion, shielded nozzles can be used for high pres-
sure cleaning, which will drastically reduce the
emission of hydrated aerosols. However, not all
applications allow the use of such a device. If the
armored nozzles are not applicable for aerosol
protection, a respiratory mask of class FFP 2 or
equivalent may be necessary, depending on the
cleaning environment.
WARNING:
•
- NEVER EVER TOUCH THE MACHINE WITH WET
HANDS OR BARE FEET.
- NEVER PULL THE POWER SUPPLY CABLE OR MA-
CHINE IN ORDER TO DISCONNECT THE PLUG
FROM THE SOCKET.
- IF DURING FUNCTIONING THE POWER SUPPLY
RUNS OUT, FOR SAFETY REASONS, TURN THE MA-
CHINE OFF.
WARNING:
•
use the machine in potentially explosive environ-
ments or areas.
Water that has flown through
machine must be discon-
Improper extension cables
If an extension cord is used,
During the use of high pres-
Depending on the applica-
It is absolutely forbidden to
> SAFETY DEVICE
WARNING:
•
catch. Whenever use of the machine is interrupt-
ed it is important to operate the safety catch to
prevent accidental activation of the jet.
- Safety features: gun equipped with safety locking
device, appliance equipped with (Class I) over-
load cutout, pump equipped with by-pass valve
or shutdown device.
- The safety button on the gun is not there to lock
the lever during operation, but to prevent its ac-
cidental operation.
WARNING:
•
with a motor protection device: in case of device
intervention, wait some minutes or, in alterna-
tive, disconnect and re-connect the product to
the electric system. In case this problem repeats
again or if the product does not start again, take
the product to the nearest After Sales Service
Point
> STABILITY
WARNING:
•
kept on horizontal bases, in a safe and stable way.

USAGE

> DESCRIPTION OF THE MACHINE
See the specific instructions manual provided.
> ASSEMBLY INSTRUCTIONS
See the specific instructions manual provided.
> WATER SUPPLY
Water supply collection
WARNING: (symbol) machine
not suitable for connection to
the potable water mains.
The cleaner can only be connected to the water
the gun is fitted with a safety
The appliance is equipped
The machine must be always
EN
19