Turn Off The Device In An Emergency; Turn Off The Device; Maintenance And Repair; Maintenance Schedule - Uws Heaty Racun 300 Advanced Plus Bedienungsanleitung

Heaty Racun 300 Advanced Plus | Operation
5.3

Turn off the device in an emergency

To switch off the device in an emergency, proceed as follows:
1 Unplug the power cord from the socket.
 The device is switched off.
2 Eliminate all reasons that led to the device turning off.
To switch the device back on after an emergency, proceed as described in section
"5.2 Operating the device" on page 43.
5.4

Turn off the device

To switch off the device after processing is complete, proceed as follows:
1 Use the Start/Stop function of the touch display to stop.
2 Unplug the power cord from the socket.
3 Allow the device to cool down.
4 Close the valves on the heating or cooling system so that no partial
volume flow runs through the device anymore.
 The device is switched off.
46
Heaty Racun 300 Advanced Plus | Maintenance and repair
6

Maintenance and repair

To ensure trouble-free operation of the device, the device must be kept clean and
in working order. Furthermore, regular visual and functional checks must be carried
out in order to detect and remedy any damage at an early stage.
WARNING
Risk of injury due to improperly performed maintenance work
The device may only be serviced by qualified personnel who have received
safety training.
Before performing any maintenance or servicing, perform the following
steps:
- Turn off the device.
- Disconnect the device from the power supply.
- Take appropriate measures to protect the device against being swit-
ched on again.
- Please also note the safety instructions in section "2 Safety instruc-
tions" on page 10.

6.1 Maintenance schedule

NOTE
Deviating intervals in continuous operation
If the device is operated continuously, shorter maintenance intervals may
be necessary. Coordinate the intervals with a specialist, taking into account
the operating conditions.
47