Cleaning; Cleaning Overview; Motor Unit - Medela Magic Inbra Gebrauchsanweisung

8. Cleaning

CAUTION
To keep the pump parts clean and hygienic:
• Disassemble and wash all parts that are exposed to breast milk immediately after use. This will
help to remove breast milk residue and prevent growth of bacteria.
• Only use drinking-quality tap water or bottled water for washing and disinfecting.
• Do not place pump parts directly in the sink to rinse or wash. Use a clean wash basin and a soft
sponge used only for infant feeding items.
• Wash your hands thoroughly with soap before washing and disinfecting the device.
• Inspect the parts for any residue after dishwashing. Repeat the washing steps, if necessary.
NOTICE
Take care not to damage parts of the breast pump during cleaning:
• Do not immerse the motor unit in water, pour or spray liquid directly on the motor unit.
• Distilled water is recommended when boiling parts to prevent substantial mineral build-up over
time, which may compromise your parts.
• If you notice a white residue on the parts after boiling, your water may have a high mineral content.
Information
By using the dishwasher, parts may become discolored. This will not impact the functioning of the parts.

8.1 Cleaning overview

Motor Unit

Container, container lid, membrane, valves and breast shields
The motor unit is not waterproof. Do not immerse in water.
Wipe before first use and as needed by following the steps below:
1. Unplug the breast pump from the power outlet and close the cap of the
charging port. Confirm that the breast pump is switched off before
cleaning.
2. Wipe with a clean towel dampened with warm soapy water.
3. Wipe with a clean towel dampened with cold water.
4. Wipe dry with a clean, dry towel.
Always disassemble and wash all parts before first use and
after each use.
Disinfect the washed parts before first use and once per day after use.
See chapter 8.2 for detailed cleaning guidance.
11