11. Pouring milk from the container
Information
Do not use the container for milk storage or transportation as it is not designed for this purpose.
1.
3.
Slide the
spout lid
down to
open
position.
click
12. Maintenance and care
12.1 Long-term storage
When not in use for an extended amount of time, the breast pump will automatically transition into
storage mode. To remove from storage mode, plug your breast pump into an external power source
and charge it.
Before storing your breast pump for an extended amount of time remember to:
Clean the containers, breast shields,
membranes and valves
(refer to chapter 8).
Once the pump
is switched off
and no lights are
on, rotate the
container
anti-clockwise
to detach it.
Ensure to pour the
milk from the
container into a
bottle or breast milk
storage bag within
few minutes after
detaching the
container.
Clean the motor unit
(refer to section 8.1).
2.
4.
Make sure that the battery status
indicator is green.
You can use the
volume scale
markings on the
container lid to
read the estimated
collected milk
volume while
holding the
container upright.
Tilt the container and
pour the milk through
the pouring spout. After
pouring milk from
container, disassemble
according to the
instructions in chapter 6
and clean parts as
described in chapter 8.
17