Cleaning; Operation With Cold Water; Operation With Hot Water; Operation With Steam - Kärcher HDS Super SX Handbuch

Operating Instructions

Cleaning

! Set pressure/temperature and cleaning-
agent concentration in line with surface
to be cleaned
Always start by directing high-pressure jet
from a good distance at object to be
cleaned to avoid damage caused by
excessive pressure.
Recommended cleaning method
Loosen up dirt:
! Spray on cleaning agent sparingly and
allow to react for 1...5 min (do not allow
to dry on).
Remove dirt:
! Spray off loosened-up dirt with high-
pressure jet.

Operation with cold water

Removal of slight contamination and rinsing
e.g.: Garden implements, terrace,
tools, etc.
! Set operating pressure as required
! Set the temperature regulator
(item 24) to "0"

Operation with hot water

Warning!
Danger of scalding
! Set the temperature regulator (item 24)
to the required temperature
We recommend the following cleaning
temperatures
— Slight contamination 30-50°C
— Protein soiling, e.g. in foodstuffs industry
max. 60°C
— Motor vehicle cleaning, machine
cleaning 60-90°C
HDS Super SX/HDS 695 SX/HDS 895 SX/HDS 1195 SX

Operation with steam

Warning!
When operating temperatures exceed 98°C
it is nor permissible for the operating
pressure to exceed 32.
Therefore the standard high-pressure
nozzle must be replaced by the steam
nozzle (manufacture no.:
4.766-023 (HDS Super SX / HDS 695 SX /
HDS 895 SX),
4.766-024 (HDS 1195 SX); see
accessories).
! Set operating pressure to minimum
value. See Figure 10
! Set the temperature regulator (item 24)
to min. 100°C
Warning!
Danger of scalding!
We recommend the following cleaning
temperatures
— Preservative removal, extremely greasy
dirt 100-110°C
— Thawing of aggregates, certain facade
cleaning operations up to 140°C
English
27