Safety Devices; Cleaning Methods - Kärcher SGV 6/5 Bedienungsanleitung

Device elements
Illustration
1 Locking mechanism of the wastewater container
2 Lid of the wastewater container
3 Wastewater container
4 Rough dirt filter
5 Filter holder
6 Steam suction hose
7 Push handle
8 Hose holder
9 Adapter for accessories (homebase)
10 Holder for steam suction pipe (parking position)
11 Retainer of the steam suction pipe (self-cleaning)
(only SGV 8/5)
12 Holder for floor nozzle (parking position)
13 Steering roller with fixed position brake
14 Detergent container (SGV 8/5)
Container for detergent spray bottle (SGV 6/5)
15 Recessed grip
16 Fresh water container
17 Accessory outlet
18 Locking mechanism of the accessory plug
19 Rubber lip insert for floor nozzle
20 Floor nozzle
21 Locking mechanism of the inserts for the floor noz-
zle
22 Triangular nozzle
23 Accessory plug
24 Cover of the accessory outlet
25 Operating field
26 Cover of the accessory tray
27 Accessory tray
28 Accessory lock
29 Screw cap of the detergent container (only SGV 8/5)
30 Screw cap of the fresh water container
31 Carrying handle of the fresh water container, fold-
ing
32 Detergent spray bottle (only SGV 6/5)
33 Steam suction pipe
34 Round brush
35 Handle
36 Detail nozzle/adapter for crevice nozzle
37 Extension for detail nozzle
38 Rubber lip for hand nozzle
39 Hand nozzle
40 Brush collar for hand nozzle
41 Crevice nozzle
42 Brush strip insert for floor nozzle
43 Step depression
44 Storage for floor nozzle
45 Cable hook, rotating
46 Air outlet, working air
47 Holder for steam suction pipe
48 Power cord
49 Holder for triangular nozzle
50 Quick start instructions
51 Cover of the wastewater container
52 Closure of the wastewater container
53 Nameplate
Operating field
Illustration
1 0/OFF
2 Operating mode: Cold water/suction operation
3 Operating mode: Steam/hot water/cold water/suc-
tion operation (eco!efficiency)
4 Operating mode: Steam/hot water/cold water/suc-
tion operation
5 Operating mode: Rinsing (SGV 8/5 only)
6 Operating mode: Detergent/suction operation
(SGV 8/5 only)
7 Operating mode: Self-cleaning (SGV 8/5 only)
8 Rotating knob
9 Display (SGV 8/5 only)
10 Indicator lamp "Operational readiness" (green)
11 Indicator lamp "Heating on" (green)
12 Indicator lamp "Service" (yellow)
13 Indicator lamp "Fresh water container empty" (red)
14 Indicator lamp "Wastewater container full" (red)
15 Indicator lamp "Fault" (red)
16 Hand wheel
17 Suction button
18 Steam switch
19 Safety catch
20 Steam quantity regulator: Level I-II-III
21 Applying hot water
22 Applying cold water
Safety devices serve for the protection of the user and
must not be put out of operation or bypassed with re-
spect to their function.
– The handle is equipped with a safety catch on the
steam switch, which prevents accidental steam re-
lease.
– In the event that the steam suction hose is shortly
unattended during operation, it is recommended to
activate the safety device (pull out safety catch). In
order to trigger the steam release again, deactivate
safety device (push safety catch in).

Cleaning methods

Cleaning of various materials
– Please read the cleaning instructions of the manu-
facturer before treating leather, special fabrics and
wooden surfaces and always do a trial on a sample
or some hidden part. Let the steam-treated surface
dry and then check whether there are any changes
to the colour or form on account as reaction to the
steam.
– We recommend that you be very careful while
cleaning wooden surfaces (furniture, doors, etc.)
because long exposure to steam can damage the
wax coating, the finish or the surface colours.
Hence we recommend that you use steam only for
short intervals or first clean the surface with a cloth
that has been steam-moistened.
– For highly sensitive surfaces (for e.g. synthetic ma-
terials, painted surfaces, etc.) we recommend that
you use the steam function at the minimum perfor-
mance level.
– Cleaning of stainless steel: Avoid the use of abra-
sive brushes. Use hand nozzle with rubber lip or
detail nozzle without a round brush.
Refreshing textiles
Always test the compatibility of the fabrics on a hidden
spot prior to treating them with the appliance: Steam
first, then allow to dry before checking for colour chang-
es or deformation.
– 2
EN

Safety Devices

Safety catch
17