Reference To Operating Instructions; Commissioning; Checking Oil Level; Filling With Scale Inhibitor - Kärcher HDS Super SX Handbuch

Operating Instructions
Reference to operating
instructions
All of the item numbers described below in
the operating instructions are referenced in
the illustration of the unit.

Commissioning

Warning!
Unit, piping, high-pressure hose and
connections must be in perfect working
order!
! Lock the hand brake.

Checking oil level

Figure 1
Warning!
Immediately consult the Kärcher service
station when oil turns milky!
! If oil level is approaching MIN mark, fill
up with oil as far as MAX mark.
! Seal oil filler inlet.
Refer to technical data for oil grade.

Filling with scale inhibitor

Figure 2
(sample pack included with scope of
delivery)
Scale inhibitor stops heating coil becoming
calcified when using hard tap water. Is is
metered in at the inlet in the water reservoir
one drop at a time.
By the manufacturer metering is set to a
mean water hardness.
! For other water hardnesses request
services of a Kärcher service station and
have it adapted to local conditions.
HDS Super SX/HDS 695 SX/HDS 895 SX/HDS 1195 SX

Filling with fuel

Warning!
Never operate unit with fuel tank empty!
Fuel pump would otherwise be destroyed!
Warning!
Figure 3
Only fill with diesel fuel or light fuel oil.
It is forbidden to use unsuitable fuels,
e.g. benzine (explosion hazard, damage to
unit).
! Close tank cap
! Wipe off excess fuel

Fill with cleaning agent

— Use only Kärcher products.
— Never pour in solvent (petrol, acetone,
thinner etc.)!
— Avoid contact with eyes and skin
— Pay attention to cleaning-agent
manufacturer's instructions on safety
and handling
Kärcher offers a customised cleaning
and care agent range.
Your dealer will be pleased to advise you.
English
23