Ec Declaration Of Conformity - Evolution Evo200 Engine Originalanleitung

NOTICE:
A parts diagram can be downloaded from
www.evolutionpowertools.com/uk/evosystem/
EC - DECLARATION OF CONFORMITY
We, manufacturer and importer
UK: Evolution Power Tools Ltd. Venture One,
Longacre Close, Holbrook Industrial Estate,
Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue
Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
Declare that the product;
EVO SYSTEM ENGINE
Part numbers: EVO200
The Directives covered by this Declaration
are as detailed below:
2006/42/EC.
Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility
Directive
2011/65/EU.
The Restriction of the Use of certain
&
Hazardous Substances in Electrical
2015/863/EU.
Equipment (RoHS) Directive
2002/96/EC
The Waste Electrical and Electronic
as amended by
Equipment (WEEE) Directive.
2003/108/EC.
2000/14/EC –
Noise Directive
The following standards have been applied:
EN 1679-1: 1998/A1: 2011
EN ISO 12100: 2010
EN 55012: 2007/A1: 2009
EN 61000-6-1: 2007
EN ISO 8528-13: 2016
EN ISO 14982: 2009
Authorised by
Barry Bloomer - CEO
01/03/16
All documentation is held on file at the above
address and is available, on request for review.
4
®
www.evolutionbuild.com
EC - DECLARATION OF CONFORMITY
We, manufacturer and importer
UK: Evolution Power Tools Ltd. Venture One,
Longacre Close, Holbrook Industrial Estate,
Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue
Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
Declare that the product;
EVO SYSTEM ENGINE
Part numbers: EVO200
The Directives covered by this Declaration
are as detailed below:
UK legislation_Supply of Machinery (Safety)
Regulations 2008
UK legislation_Electromagnetic Compatibility
Regulations 2016
UK legislation_Noise Emission in the
Environment by Equipment for Use Outdoors
Regulations 2001 No.1701
UK legislation _The Restriction of the Use of
Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012
The following standards have been applied:
EN 1679-1/A1: 2011
EN ISO 12100: 2010
EN 55012/A1: 2009
EN 61000-6-1: 2007
BS EN 1679-1/A1: 2011
BS EN ISO 12100: 2010
BS EN 55012/A1: 2009
BS EN 61000-6-1: 2007
Authorised by
Barry Bloomer - CEO
13/05/21
All documentation is held on file at the above
address and is available, on request for review.