Evolution EVO200 ENGINE Originalanleitung Seite 21

MAINTENANCE SUMMARY CHART
ITEM COMMENTS
Visually
All fuel lines & unions
All Electrical Leads
Check
Check condition
Spark
Clean & adjust gap
Plug
Replace if necessary
Check Oil Level
Engine
Oil
(10W 40)
Change / Replace Oil
Air
Filter Replace if necessary
Fuel
Filter
Replace if necessary
Recoil
Ensure ventilation
Starting
unobstructed
System
Uni-
Spray (with Silicone
coupling
Lubricant)
Internal
Rubber
Visual Check
Element
DAILY
Clean
Clean
slots are
Clean
through the 3 locating pin connection points.
* Evolution's internal test data.
www.evolutionbuild.com
1 MONTH 3 MONTH
( or 20 hours) ( or 50 hours)
After 1st
MONTH
After every 25 hours of use lightly spray
Every 250 hours of use* - replace if worn or damaged.
This procedure needs to be carried out carefully and
a seperate instruction sheet is available from
www.evolutionpowertools.co.uk/evosystem.html.
If you do not feel confident, please contact the
helpline for further help and advice.
®
6 MONTH
( or 100 hours)
EN
21