probst SVZ-UNI Betriebsanleitung Seite 64

Maintenance and care
STABILIZER (Side arm/support)
1
GUIDING SHAFT
Keep guiding shaft free of dirt.
Grease if necessary the upper and lower range of the guiding
shaft (see arrows).
The manufacturer of the device does not take over any adhesion for malfunctions, which
are to due to maintenance periods not taken place, rough contamination and
maintenance lacking.
54000046
The distance (A) between stabilizer (1) and bracket
fulcrum (2) must be equal large with all three
stabilizer.
Differently large distances are referring to bent
stabilizer (1).
•
Correct bent stabilizer (1).
A
2
Guiding shaft
28 / 30 GB