Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 174

16
Troubleshooting
16 Troubleshooting
Fault Cause
Vehicle
✓ No fuel in the tank.
does not
✓ Spark plug defective.
start
✓ Gas delivery faulty.
✓ Hydraulic hand lever not in zero
position
Vehicle ✓ Parking brake applied.
does not
✓ Gearbox disengagement on neutral.
drive
✓ V-belt defective / loose.
Attachment ✓ Hydraulic connections not properly
does not connected.
rotate
✓ Incorrect actuation direction of the
hydraulic operating lever.
✓ Hydraulic oil level too low.
✓ Control valve defective.
✓ Pressure or flow rate too low.
✓ Hydraulic engine defective.
Hydraulic ✓ Hydraulic oil level too low.
lift does
✓ Control valve defective.
not work
✓ Cylinder defective.
62
Corrective
✓ Fill the fuel tank.
✓ Replace the spark plug.
✓ Check the throttle cable
position.
✓ Move the hand lever to the
zero position.
✓ Release the parking brake.
✓ Switch the lever.
✓ Replace or tension the V-
belt.
✓ Check connections.
✓ Move the hydraulic
operating lever in the other
direction.
✓ Fill up with hydraulic oil.
✓ Visit a specialised
workshop.
✓ Visit a specialised
workshop.
✓ Visit a specialised
workshop.
✓ Fill up with hydraulic oil.
✓ Visit a specialised workshop.
✓ Visit a specialised workshop.