Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 168

13
Maintenance and servicing
13.6 Changing gearbox oil
Work sequence:
56
O
i
l
l
e
v
e
l
✓ Remove the oil filter protection.
✓ Dismantle the oil filter.
✓ Allow the oil to drain completely.
✓ Remove the filling screw and oil level check
point.
✓ Replace the filter element (item no.: KT-00-
00797).
✓ Install the oil filter and oil filter protection
correctly.
✓ Fill up the gear oil to the oil level checkpoint
(quantity approx. 2.8 litres).
✓ Oil grade default 20W50, 15W50 for colder
regions.
✓ Close the checkpoint and the filling screw again.
✓ Replace the sealing ring if necessary.
Operate the vehicle for approx. 1 minute and check
the oil level again
Filling screw
Oil filter protection
Oil level checkpoint
Oil filter incl.
filter element