Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 152

12
Attachments
12.1 Mounting the equipment
The lifting gear connects the machine and the attachment to form a single working
unit. The position and lifting of the attachment are controlled hydraulically. In addi-
tion, the weight and load of the attachment exert pressure on the front axle, improv-
ing traction.
40
If ballast weights are required, they must be attached to the
CM2 PRO at the fastening points provided for this purpose in
accordance with the regulations.
Crushing hazard
Risk of crushing between the attachments and the
machine!
When installing the attachments to the machine, there is
a risk of crushing the upper and lower extremities.
Therefore:
✓ Act carefully and prudently.
✓ Observe the manufacturer's recommendations for
personal protective equipment (see chap. 4.13).