Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 141

10
Commissioning
10 Commissioning
10.1 Checking the engine before commissioning
The following must be performed regularly before each use.
Fig. 8: Oil level
Fig. 9: Sight glass
Fig. 10: Fuel supply
Checking the engine oil level
The oil quantity is checked with a dipstick! Pull out
the dipstick:
Depending on the engine variant, the dipstick is
located on the side of the engine.
Honda GXV 390 – dipstick in direction of travel right
Loncin 803cc – dipstick in direction of travel left
Checking the hydraulic oil level
The oil quantity is checked with a dipstick!
The fill level of the hydraulic oil tank should always
be in the shown range
The oil quantity must be within the labelled range!
Checking the fuel tank contents
The fuel quantity is checked through large slotted
holes in the side parts of the machine. The fuel tank
is transparent.
The fuel tank is located behind the driver's seat on the
left in the direction of travel.
Open the cover lid by turning it.

between 5 cm and 7 cm.
29