Westermann Cleanmeleon 2 PRO Betriebsanleitung Seite 148

11
Operation
Accelerator pedal
The CM2 PRO comes with an accelerator pedal on the
right-hand side of the vehicle.
Pressing the pedal forwards moves the vehicle forwards.
The speed is regulated depending on the pressure applied
to the pedal.
Fig. 17: Accelerator pedal
The machine is reversed by pressing the pedal to the
rear. The speed is regulated depending on the pressure
applied to the pedal.
Steering
The CM2 PRO has a very tight turning radius due to the
wheel geometry.
The chain-guided steering is transferred to the rear
wheel via the steering wheel. This makes it possible to
turn on the spot in narrow alleys and spaces.
Fig. 18: Steering
Regulating the engine speed
During operation, adjust the hand throttle position
according to the desired engine speed.
Move the hand throttle up or down to adjust the rotating
speed.
Fig. 19: Rotating speed
regulation
36