Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20.8 Initial setup
The initial setup wizard can be called up again here. For more information, see section
"8 Initial setup" on page 19.
Press the MENU button and use the ▲ ▼ buttons to select [System
>
setup] > [Initial setup] and press OK.
>
Then start by setting the system language.
20.9 Data protection
Under this point you will find data protection information.
Press the MENU button and use the ▲ ▼ buttons to select [System
>
settings] > [Data protection] and press OK.
21 Cleaning
WARNING!
To avoid the risk of electric shock, do not clean the appliance with a wet
cloth or under running water. Disconnect the mains plug before cleaning!
Do not use scouring pads, scouring powder or solvents such as alcohol or
petrol.
Do not use any of the following substances: Saltwater, insecticide ammonia,
chlorinated or acidic solvents (ammonia), scouring powder.
Clean the housing with a soft cloth moistened with water. Do not use
solvents, spirits, thinners, etc.; they could damage the surface of the device.
Only clean the display with a soft cotton cloth. If necessary, use a cotton
cloth with small amounts of non-alkaline, diluted water- or alcohol-based
soapy water.
Rub the cotton cloth gently over the surface until it is completely dry.
41
Werbung
