Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Enter a 4-digit PIN under [TechniSat CONNECT PIN] and press the
>
OK button to save. The default PIN is 1234.
20.1.1.6
Delete network profile
Use the menu items [Remove inactive networks] or [Remove all networks] to
delete an existing connection to a Wi-Fi network or all configured networks. If you
want to reconnect the device to this network, you must make all settings again.
20.1.1.7
WLAN connection in standby
Under [WLAN active in standby], select whether the WLAN connection
>
should also be maintained in standby mode [YES] or not [NO].
Please note that this function must remain switched on for unrestricted and
smooth operation and control via the TechniSat CONNECT app.
The TechniSat CONNECT app can be downloaded from the app stores
of your smartphone.
20.2 Clock time time and date settings
20.2.1
Set time/date manually
Depending on the time update setting (point 20.2.2), you must set the time and date
manually.
Press the MENU button and use the ▲ ▼ buttons to select [System
>
settings] > [Time/date].
Press the OK button.
>
Use the ▲ ▼ buttons to select the [Set] entry and press
>
OK.
The first digits (day) of the date flash and can be changed using the ▲ ▼
>
buttons.
The ▲ button increases the value, the ▼ button decreases the value.
Press the OK button to accept the setting.
>
>
The next digits (month) of the date then flash and can also be changed as
described above.
After each additional setting, press the OK button to skip to the next setting.
>
>
Proceed as described above for the time.
After all settings have been made and the last OK
>
is pressed, [Time Saved] appears on the display.
37
Werbung
