Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20 System settings
All settings described in this section apply equally to all sources.
20.1 Int ernet settings
Via MENU > [System settings]. > [Internet settings] to call
>
up and configure the network settings.
20.1.1 Connection via WLAN
To configure the network connection via WLAN, you have the option of using the
network wizard or doing this manually.
20.1.1.1 Configuration via network wizard
Select [Wizard] to start it.
>
The network wizard will now search for all Wi-Fi networks within range and
display them to you.
Then select your Wi-Fi network using the ▲ ▼ and OK buttons.
>
can now choose whether you want to use the WPS function or your WLAN network.
password manually.
>
If you want to use the WPS function, first start it on your router according
to its operating instructions and then select [Connect WPS with
button] in the network wizard.
Please note the display messages. The connection process is usually
completed after a few seconds and the Wi-Fi connection can now be used.
Alternatively, the [Connect WPS with PIN] function can also be used if
this function is supported by the router.
>
If you want to enter your WLAN password manually or your router does not
support the WPS function, select [Connect without WPS].
>
Then enter your WLAN password using the virtual keyboard that appears and
confirm by selecting OK.
To cancel the entry, select the CANCEL field and press the OK button. If
you have made a typing error, you can delete the last letter entered by
selecting the DEL field.
While the virtual keyboard is shown on the display, you can press ▲ /
▼ buttons on the remote control. The ▲ / ▼ buttons move the marker up and
down, the ◀ / ▶ buttons move the marker to the right and left.
>
The password entered will now be checked. This process is usually
completed after a few seconds and the WLAN connection can then be used.
You
35
Werbung
