Werbung
Verfügbare Sprachen
Verfügbare Sprachen
If the pairing is successful, [Connected] appears on the display.
>
17.3 Play music
>
Select a music track on your music player and play it.
>
The sound is now played back via the DIGITRADIO 4 IR.
Depending on the Bluetooth protocol of your external device, you can
control the music playback using the playback buttons on the remote
control or the front of the device.
Play/Pause
Next
Previous
Title from beginning
Volume
Alternatively, you can use the playback controls of the music app on your
external device.
If there is no playback or no device is paired, the DIGITRADIO 4 IR
switches to standby mode after approx. 15 minutes.
17.4 Revive coupling
To cancel an active pairing, select MENU > [Disconnect] and press the OK
button. Please note that the device to be disconnected must be connected to the
DIGITRADIO 4 IR if you want to disconnect it.
You can then pair a new device as described in section 17.2.
Alternatively, you can also set up the pairing on your external device. Follow the
instructions in the operating instructions for your external device.
18 Audio input (AUDIO-IN)
You can play the sound of an external device via the speakers of the
DIGITRADIO 4 IR.
Connect the external device to the AUDIO IN connection (12, 3.5 mm
>
jack, stereo) on the back of the device.
Use the MODE button to select the audio input. AUDIO- IN] appears on the
>
display.
The control takes place on the external device.
Do not set the volume too low to avoid background noise.
- button
title button
title- 2x button
- key
- Volume +/- buttons
31
Werbung
