Werbung
Verfügbare Sprachen
Verfügbare Sprachen
13 Classic Radio Select
Press the MODE button until [Classic Radio Select] appears in the
>
display.
An active Internet connection is required for Klassik Radio Select. I f y o u
a r e starting Klassik Radio Select for the first time without having
configured a WLAN connection during the initial setup, you must first
configure a WLAN connection.
Set up the connection. For more information, see chapter "20.1 Internet
settings" on page 35.
You need a Klassik Radio Select account to use this function. You can find
out more about how it works at hGps://www.klassikradio.de/select.
>
Enter the user name (e-mail) and password of your Klassik Radio Select
account.
>
You can then select a music track from various categories and play it by
pressing OK. Optionally, you can also create/manage music and playlists
at
hGps://play.klassikradio.de/.
14 Play music (USB media)
You have the option of playing audio files on a USB data carrier via the DIGITRADIO
4 IR.
General information on the use of USB media
-
The device does not support the connection of USB media (hubs ...) via
USB extension cables.
-
Not suitable for direct connection to PCs!
-
The device supports USB media up to 2TB formatted in FAT16 or FAT32
file format. The maximum file size of a media file is max. 4GB.
-
Only music files of the type .mp3 can be played.
-
The display of the folders depends on the structure on your USB medium.
Therefore, pay attention to the information on the display.
-
If no storage medium is connected or cannot be read, the message [No
USB device] appears on the display.
-
If there is no playback, the DIGITRADIO 4 IR switches to standby after
15 minutes.
>
Insert the USB data carrier into the USB port (11) on the back of the
DIGITRADIO 4 IR.
Switch to USB mode by pressing the MODE button.
>
USB] appears on the display.
>
23
Werbung
