Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15.6 Selecting the programmed stations
Briefly press the desired number key 0 ... 9 briefly. If you have not saved a
>
station in the selected programme position, [Favourite empty] appears.
Alternative:
Briefly press the FAV button, use the ▲ ▼ buttons to select a favourite
>
memory location 1...30 and press the OK button.
15.7 Deleting a programme position memory
>
Save the new channel to the relevant programme position.
15.8 Signal strength
Press the INFO button several times. The signal strength is displayed.
>
>
The level of the signal strength bar shows the current level:
Transmitters whose level is below the required minimum signal strength do
not transmit a sufficient signal. If necessary, align the aerial as described
under point 5.2.
Pressing the INFO button several times switches through
various information, e.g. programme type, multiplex name,
frequency, signal error rate, data bit rate, programme format, date.
15.9 Dynamic Label Plus
If supported by the programme provider, the Dynamic Label Plus service allows, for
example, the name of the current programme or the title and artist to be displayed
additionally.
15.10 Set DRC
The compression rate compensates for dynamic fluctuations and the associated volume
variations.
Press the MENU button and use the ▲ ▼ buttons to select [Sound
>
settings] > [DRC].
Press the OK button.
>
Minimum signal strength
Signal strength
27
Werbung
