Withings Scan Monitor Gebrauchsanweisung Seite 2

Scan Monitor
2. USING THE SCAN MONITOR
a. Set-Up
● Withings ScanWatch is a connected watch, distributed without ECG function
● Scan Monitor is activated during the Association of ScanWatch and the Withings
application
● Scan Monitor is only available for Withings ScanWatch, paired with a smartphone with
iOS 12 or later, or Android 8 or later.
b. On-boarding
● Open Withings Withings app.
● In the timeline tab, tap "+", then select "Electrocardiogram (ECG)"
● Follow the onscreen instructions.
● You may exit on-boarding at any time by pressing "Cancel".
c. How to take an ECG recording
● Make sure your ScanWatch is snug on the wrist you selected in Devices > ScanWatch >
More settings> Device Orientation.
● Rest your arms on a table and hold the top electrode with your second hand (with your
thumb and index for example, as shown on fig. 05-1). You do not need to press the bezel
during the session.
● Make sure to follow the gesture indicated in "the best practice" article within the mobile
application in order to obtain an ECG with a good signal quality
Fig. 1 - How to place second hand to get an ECG measurement
Rev. 1.7 - Sep 12, 2023