Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15 Specifications
Mechanical data
Clamping range for cable diameters
• GEL 6505A
• GEL 6505B, design N/U
• GEL 6505B, design C
Tightening torque cable gland
• GEL 6505A
• GEL 6505B, design N/U
• GEL 6505B, design C
Connection elements
Supply voltage
Positioning drives
Higher level control system (plug-in module)
Service connector
Controls
Direct control of the positioning drives
Reset
Upgrade mode
Indicators
Status displays per positioning drive
Status display Logic circuit
Ambient data
Operating temperature range
Condensation
(1)
Supplies the electronics of the SeGMo-Box (logic circuit) and the control electronics of the connected positioning
drives (logic circuits) with power.
(2)
Supplies only the power electronics of the connected positioning drives (power circuits) with power when the power
supply is isolated.
(3)
Maximum tensile force for connection cables with 6 (10) mm
160
Technical data positioning drive
–
M16: 4.5 to10 mm
M20: 6 to13 mm
M25: 9 to17 mm
M20: 9 to 10.5 mm
–
M16: 1,5 Nm
M20: 3 Nm
M25: 4 Nm
M20: 10 Nm
Logic circuit
Core cross section spring-cage terminal:
0.5 mm
Power circuit
Core cross section: 6 mm
[10 AWG to 8 AWG]
2 x 4-pin socket strip
Power supply positioning drives:
Core cross section hybrid cable
0.5 mm
Internal communication positioning drives:
Core cross section hybrid cable
0.14 mm
Depending on the communication interface
used
USB port (female, type B)
1 push-button per positioning drive
1 reset push-button
2-pin jumper
3 LEDs
1 LED
0 to +60 °C
not permitted
2
: 80 (90) N
(1)
2-pin socket strip:
2
to 1,5 mm
2
[20 AWG to 16 AWG]
(2)
2-pin connection terminal:
2
to 10 mm
(3)
2
/1.5 mm
2
[20 AWG/16 AWG]
2
/0.25 mm
2
[26 AWG/24 AWG]
Lenord+Bauer
2
GEL 6505
Werbung
