Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 Safety
2.4
Possible hazards
The product corresponds to the state of the art and accepted safety rules. As far as possible,
hazard sources were eliminated by design or secured by suitable equipment. However, certain
hazards may arise.
2.4.1
Hazards to persons
Risk of injury if the documentation is not observed!
These operating instructions and the reference documents contain important information to avoid
injury, material damage and malfunction.
Non-observance of these operating instructions and the reference documents may result in
serious injuries or even death.
●
Read these operating instructions and all reference documents before performing any work.
Risk of crushing due to falling product!
The product weighs more than 1 kg [2.20 lb]. Dropping the product can cause minor injuries due
to bumping or crushing.
●
Wear personal protective equipment.
2.4.2
Material damage
Material damage due to electrostatic discharge!
Electrostatic discharge can damage the electronic components of the product.
●
Only touch connector pins and connection wires while using suitable ESD
equipment .
The product is shipped in a carton with an ESD foam insert. The original packaging
protects the product from electrostatic discharge.
●
Store and transport the product only in its original packaging.
Material damage due to the application of force!
The product is a precision device. Impacts or other applications of force can damage the product.
●
Do not hit or step on the product.
●
Avoid hard knocks.
●
Do not bend any connector contacts.
●
Do not drop the product.
The original packaging protects the product from shocks.
●
Store and transport the product only in its original packaging.
●
Do not remove the product from its original packaging until you are at the installation site.
100
Possible hazards
Lenord+Bauer
GEL 6505
Werbung
