Werbung
RIC BODY
PARTS
SET
DBOI
*Cut away.
CAUTION
'Read carefully and fully understand the in-
structions before commerwing assembly.
'When assembling this kit, tools including
knives
are used.
Extra
care
should
be taken
to avoid personal injury.
'Read and follow the instructions supplied
with paints and/or cement, if used (not in-
cluded in kit).
'Keep out Of
Of small children. Chil-
dren must not be allowed to put any parts in
their mouths, or pull vinyl bag over their
heads. Sensibly dispose
of the left over
parts immediately.
Trimming
*Cut
off using scissors or a modeling knife.
Painting
Preparing body for painting
o
0
o
*Apply
*Wash the body thoroughly with detergent
in order to remove any oil, then rinse well
*Cut
and allow to air dry.
one side to body and the other side to
chassis.
Velcro tape (body side)
This mark denotes numbers for Tamiya
Paint colors. Paint body from inside using
polycarbonate paints.
Velcro tape (chassis side)
coco
TAMIYA
POLYCARBONATE
PAINTS
PS-340-1-3<
/ Bright red
PS-5, pc-5
/ Black
02007
TAMIYA
*Make 6mm hole, matching the position of antenna.
Trimming
Make
6mrn
holes.
*Make
3mrn holes.
*Choose
desired setting.
Painting body
o
Bright red
pc-5,
PS-5
73
•y 5
Black
*Mask
off inside areas to be painted
red
with
masking
tape
(available
separately).
*Paint
black
using
polycarbonate
paints. After
paint has dried, remove
masking
tape
and
paint
remaining
area red.
*Remove
protective coating before
painting
wing.
after paint has completely cured.
Velcro tape
in half then
apply
-v
*Make
6mm holes.
*Cut away.
cutting line according to
pc-5,
PS-5
Black
pc-5,
PS-5
--5-375
Black
0
*Paint
this side.
*Apply
sponge tape to protect from dust and debris.
Cut according
to body and chassis shapes.
58395 RCC DBOI Durga Body (11050671)
ITEM 58395
Werbung
