DAZE Duo T Installationsanleitung Seite 19

12 - Warranty
Duo can only be opened by qualified personnel. Before performing any installation, cleaning, or decommissioning tasks on
Duo, disconnect the device from the electrical network.
Product Care
Duo should be inspected to prevent any potential damage to the casing and components. In case of a damaged Duo, to
avoid the risk of electric shock, it is mandatory to report the presence of the damaged device to ensure it is not used by
others, and to immediately call a qualified operator to repair the product or, if necessary, arrange for its decommissioning.
To ensure a long lifespan for the product, it is recommended to care for it as follows:
• Use a damp cloth to clean the exterior of Duo, only after disconnecting it from the power supply. Avoid abrasive sponges
and/or solvents.
• Differential devices should be checked periodically according to the manufacturer's instructions. If no action is taken,
contact a technician as soon as possible, as the safety of the system is no longer guaranteed.
Warranty
Duo is guaranteed to operate properly for the period specified and regularly recorded in the sales contract (provided it is
used under the intended conditions). This warranty consists of restoring the product's efficiency through free replacement
or repair of parts that are unusable or ineffective due to manufacturing defects and/or assembly errors. The installation/
disinstallation of the charger is excluded from the warranty. This warranty becomes void if the defect is linked to: -Negligence
-Accidents-Late defect reporting-Improper use-Unauthorized modifications-Repairs with non-original parts
Damage or malfunction caused by exposure to unusual environmental conditions or by the user's electrical network
Incorrect installation by uncertified installers.
The installation/disinstallation of the product is excluded from the warranty.
Disposal
Packaging materials must be disposed of in containers for paper, cardboard, and plastic. The components of Duo must
be separated and disposed of separately. Further information on current disposal facilities can be requested from local
authorities.
13 - CE Declaration of conformity
Product type: Electric vehicle charging device(s).
Model: Duo, codes: OT01645S, OS01**64CP, OS01IT64TCP, OS01**64M*P.
The manufacturer, DazeTechnology S.r.l., declares that the aforementioned products, when correctly installed, maintained,
and used in accordance with their intended purpose, in compliance with the regulations and laws of the countries in which
they are installed, and following the manufacturer's instructions, comply with the essential requirements of the European
Directives, harmonized European standards, and international standards as follows: Low Voltage Directive (LVD) 2014/35/EU
(EU DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND COUNCIL)
EN 61851-1:2019 "Electric vehicle conductive charging system - Part 1: General requirements"
Electromagnetic Compatibility Directive (EMC) 2014/30/EU (EU DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT
AND COUNCIL) IEC 61851-21-2:2018 "Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements
for conductive connection to an AC/DC supply - EMC requirements for off-board electric vehicle charging systems."
Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment,
and modification of Annex II of Delegated Directive 2015/863/EU.
The CE marking on the products and/or packaging indicates that DazeTechnology S.r.l. makes the relevant technical files
available to the authorities of the European Union.
Legal Representative,
Andrea Daminelli
EN
19.