Fitting The Compressor Foot - Elmo Rietschle 2Bh20360-1 Instandsetzungsanleitung

9 Mounting
9.2

Fitting the compressor foot

▪ Position the compressor foot (062).
▪ Put the washers (067) onto the screws (066).
▪ Put medium strength threadlocker onto the thread of the screw (066).
▪ Screw the compressor foot (062) to the compressor housing (002) using the
screws (066).
36 / 60
610.44495.40.310 · 09.2013 © Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch Tel. 071 918 60 60, Mail: v-g@prematic.ch