Disassembly Of The Compressor Housing - Elmo Rietschle 2Bh20360-1 Instandsetzungsanleitung

8 Disassembly
8.6

Disassembly of the compressor housing

▪ Undo the screws (025) and remove with the washer (024).
▪ Remove the nuts (028) and washers (128) on the intermediate flange.
▪ Pull off the compressor housing (002) from the intermediate flange (026).
▪ Remove the radial shaft seal (096) from the compressor housing (002) and
note the installation position.
30 / 60
610.44495.40.310 · 09.2013 © Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch Tel. 071 918 60 60, Mail: v-g@prematic.ch