Disassembly; Disassembly Of The Silencer - Elmo Rietschle 2Bh20360-1 Instandsetzungsanleitung

© Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
8.1

Disassembly of the silencer

Only 2BH20360-1...M
▪ Remove the hexagon cap nuts (476), hold the hexagon nuts (131) if required.
▪ Remove the hexagon nuts (131).
▪ Remove the hexagon cap nuts and threaded rods (444).
▪ Remove the silencer kit (990).
▪ Remove the flange (446).
▪ Removing the protective grid (445) and clean if necessary.
▪ Remove the dowel pin (443) from the silencer housing (403) or flange (446).
▪ Remove the silencer insert (413) from the silencer housing (403).
▪ Loosen screws (051) with washers (050).
▪ Remove the stepped pipe (048/049).
All the 2BH20...-1 (except 2BH20360-1...M)
▪ Remove the hexagon cap nuts (476) with threaded rods (444).
▪ Remove the silencer kit (990).
▪ Remove the flange (446).
▪ Removing the protective grid (445) and clean if necessary.
▪ Remove the dowel pin (443) from the silencer housing (403) or flange (446).
▪ Remove the silencer insert (413) from the silencer housing (403).
25 / 60
Tel. 071 918 60 60, Mail: v-g@prematic.ch

Disassembly

09.2013 · 610.44495.40.310
8