Information On Explosion Protection; Requirements For Personnel; Personnel Qualifications And Training - Elmo Rietschle 2Bh20360-1 Instandsetzungsanleitung

Tasks
Transportation,
storage
Repair
Working on the electri-
cal system
Disposal
© Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
2.3

Information on explosion protection

G-BH2 for explosive areas (ATEX) must only be repaired in certified workshops.
2.4

Requirements for personnel

2.4.1

Personnel qualifications and training

Voiding of the warranty!
Repairs carried out by untrained and unauthorised repair personnel during
the warranty period can result in the voiding of the warranty.
 Repairs during the warranty period should be carried out only by trained and
authorised personnel.
All those who will work on the G-BH2 must have read and understood these and
all related instructions.
Personnel in training may only work on the G-BH2 under supervision of personnel
who have the required knowledge.
Only allow work on the G-BH2 to be carried out by personnel with the following
knowledge:
Personnel
Shipper, qualified per-
sonnel for transport and
storage
Qualified personnel for
repair
Electrician
Qualified personnel for
disposal
Safety and responsibility
NOTICE
Required knowledge
▪ Safe handling with lifting gear such as hoists and
fork lift trucks
▪ Safe handling of tools and materials
▪ Disassemble and mount vacuum pumps and com-
pressors
▪ Assess damage to vacuum pumps and compres-
sors
▪ if necessary, qualifications for working on explo-
sion-proof equipment
▪ Understanding and safe implementation of circuit
diagrams
▪ Lay and connect electrical lines
▪ Connection of electrical machines, switches, sen-
sors, circuit breakers
▪ Analysis and testing of electrical systems
▪ Assessment of the effectiveness of electrical pro-
tection measures
▪ Decontaminating polluted materials
▪ Knowledge of recycling
▪ Correct and environmentally-friendly disposal of
materials and substances
7 / 60
Tel. 071 918 60 60, Mail: v-g@prematic.ch
2
09.2013 · 610.44495.40.310