Disassembling The Cover Side Silencer And Blind Flange - Elmo Rietschle 2Bh20360-1 Instandsetzungsanleitung

10 Disassembly options
610.44495.40.310 · 09.2013
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
10.4

Disassembling the cover side silencer and blind flange

▪ Remove the hexagon cap nuts (476).
▪ Remove the hexagon cap nuts (476) with threaded rods (444).
▪ Remove the silencer kit (990).
▪ Remove the flange (446).
▪ Removing the protective grid (445) and clean if necessary.
▪ Remove the dowel pin (443) from the silencer housing (403) or flange (446).
▪ Remove the silencer insert (413) from the silencer housing (403).
▪ Remove the screws (152) and remove the blind flange (035).
▪ Check the warning sign (5060) for damages and replace if required.
If the G-BH2 is equipped with standard silencers, then continue disassem-
bly with Disassembly of the silencer [➙ 25].
If the G-BH2 is equipped with standard ventilator, then continue disassem-
bly with Dismantle the ventilator [➙ 26].
If the G-BH2 is provided with an auxiliary ventilator (B), then continue disas-
sembly as per Disassembling the auxiliary ventilator [➙ 52].
50 / 60
Tel. 071 918 60 60, Mail: v-g@prematic.ch
© Gardner Denver Deutschland GmbH