Elmo Rietschle 2BH20360-1 Instandsetzungsanleitung Seite 84

8 Disassembly
A Integrated frequency inverter 2FC....-1
B Auxiliary ventilator
610.44495.40.310 · 09.2013
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
8 Disassembly
This section describes the disassembly of a standard model.
For models with the following options, a reference will be made at the appropriate
place in section Assembly options [➙ 53].
When the G-BH2 is equipped with integrated frequency inverter 2FC4..2-1ST
(A), then continue disassembly with Disassembling the integrated frequency
inverter 2FC4..2-1ST/PB/CB/SC [➙ 46].
When the G-BH2 is equipped with integrated frequency inverter 2FC4..3-1ST
(A), then continue disassembly with Disassembling the integrated frequency
inverter 3FC4..2-1ST/PB/CB/SC [➙ 47].
If the G-BH2 is equipped with integrated frequency inverter 2FC4...-1NE (A),
then continue disassembly with Disassembling the integrated frequency
inverter 2FC4...-1NE [➙ 48].
If the G-BH2 is provided with a flange on the discharge side and/or suction
side without silencer (C) , then continue disassembling as per Disassembly
of flange without silencer [➙ 51].
If the G-BH2 is equipped with an (D) on the discharge side and/or suction
side cover, then continue disassembly with Disassembling the cover side
silencer and blind flange [➙ 50].
C Discharge side and/or suction side without
silencer with flange
D Discharge side and/or suction side, cover side
24 / 60
Tel. 071 918 60 60, Mail: v-g@prematic.ch
© Gardner Denver Deutschland GmbH