Parkside Performance PHDP 180 C2 Originalbetriebsanleitung Seite 34

GB MT
If the power cord of this
•
device is damaged, it
must be replaced by the
manufacturer, their cus-
tomer service or by a
similarly qualified per-
son in order to avoid haz-
ards. contact the service
centre.
Connect the device only
•
to a power outlet with
a residual current cir-
cuit breaker (FI switch) of
rated residual current no
more than 30 mA.
Use only extension cords
•
that are designed for out-
door use. The connec-
tion must be dry and
routed above the ground.
We recommend using a
cable drum that holds
the power outlet at least
60 mm above the ground.
Extension cords must
•
have a minimum wire
cross section of 2 × 2.5
mm².
High-pressure hoses,
•
fittings and couplings
are important for device
safety. Only use high-
pressure hoses, fittings
and couplings recom-
34
mended by the manufac-
turer.
Do not start the device
•
up if the power cord, wa-
ter supply or other im-
portant parts such as the
high-pressure hose or
spray gun are damaged
or leaky.
Only use the device
•
standing and on a firm,
level surface.
Never use the device
•
if there are children or
animals nearby. People
nearby must wear pro-
tective clothing.
Operation
Pay attention, be aware
•
of what you are doing
and take the utmost care
when working with the
device. Do not use the
device if you are tired or
you are under the influ-
ence of drugs, alcohol or
medication.
High-pressure jets can be
•
dangerous if used incor-
rectly. The jet must not
be directed at persons,
animals, active electrical
equipment or the device
itself.