Werbung
MOUNTING
• Can be mounted on bicycles with a luggage
carrier which meets the EN ISO 11243:2016
standard (27 kg or more).
• Can be mounted on bicycles with a luggage
carrier with an outer width between 120 and 175
mm.
• Can be mounted on bicycles with a luggage
carrier with round tube profile with diameter
between 10 and 20 mm.
• Other tube shape: Make sure that the carrier
adapter has good grip and fitment on the
carrier.
• Cannot be mounted on bicycles with a luggage
carrier that does not have straight and parallel
sides.
• Cannot be mounted on bicycles with a luggage
carrier with a tube diameter of less than 10 mm.
• Cannot be mounted on bicycles with a luggage
carrier with a tube diameter of more than 20
mm.
• Make sure that the carrier adapter does not
touch or damages the battery of the E-bike.
• The seat should only be mounted on a bicycle
which is suitable for this kind of load. Please ask
your bicycle supplier for detailed advice.
• The child seat is fitted on the luggage carrier of
the bike with the carrier adapter. The bolts,
accessible from the right side of the carrier
adapter, must be tightened hard enough to fix
the seat securely and prevent it from sliding.
Make it a rule to check this before starting a
trip with the bike.
• Make sure the carrier adapter is well tightened
and check this at regular intervals.
• The additional safety strap needs to be
secured to the bicycle frame or seat post.
• For optimal comfort and safety of the child,
ensure that the seat does not slope forwards,
so that the child does not tend to slide out of it.
It is recommended to install the seat in a way
that the back rest is sloped backwards slightly.
• Install the seat as close to the saddle as
possible.
• Check all parts of the bike that they function
correctly with the bicycle seat mounted.
USE
• For safety reasons must this seat only be fitted
to luggage carriers conforming to EN ISO
11243:2016.
• Check whether there are any laws or
regulations specific to the carrying of children
in seats attached to cycles that apply in the
country in which the seat is used.
• The child seat is approved for children from
about 9 months to 6 years or maximum 22 kg
weight. Ensure that you re-check from time to
time that the child's weight and size do not
exceed the maximum capacity of the seat.
• Do not carry a child that is too young to sit
safely in the seat as regarding minimum age of
the child. Carry only child that are able to sit
unaided for a longer period of time, at least as
long as the intended bicycle journey.
• Ensure that it is not possible for any part of
the child's body or clothing to come into
contact with any moving part of the seat or
cycle and to re-check as the child grows, due to
the danger of entrapment of feet in the wheel
and of the fingers in brake mechanisms and
sprung saddles. The child seat gives good side
and feet protection. However, you are
recommended to buy and fit a closed wheel
guard/chain guard. You can buy this at your
bicycle dealer.
• Check there are no sharp objects, such as split
wires, on the bicycle that can harm the child.
• Ensure that the restraint system is not loose or
able to become trapped in any moving parts
particularly the wheels, including when the
cycle is ridden without a child in the seat.
• Always use the safety belt/restraint system,
ensuring the child is restrained in the seat.
• A child sitting in a child seat should be dressed
more warmly than the rider.
• The child should be protected against rain with
suitable waterproof garments.
• Remember to put the child's helmet on that
complies to EN 1078:2012+Al:2012 before
starting your bicycle trip.
• When riding for the first time with the seat
fitted, test ride the cycle in a safe/quiet
environment before riding on the highway.
• Cover any exposed rear saddle springs.
• When transporting the bicycle by car (outside
the car) remove the seat. Air turbulence might
damage the seat or loosen its fastenings to the
cycle, which could result in an accident.
• The additional safety strap should be kept
fastened to the bike whenever the seat is
mounted on the bicycle.
• For safety reasons this seat should only be
mounted on EN ISO 11243:2016 approved carrier
racks.
WARNINGS
• Do not attach additional luggage to
the child seat. We recommend that
extra luggage is attached at the
front of the bicycle.
• Do not modify the seat.
• The cycle could behave differently
with a child in the seat. Particularly
with regard to balance, steering
and braking.
• Never leave the cycle parked with a
child in the seat unattended.
• For any form of crack or if the
surface starts to deconstruct, this
indicates that the life of the seat
has been reached and it should be
replaced. A professional shall be
contacted in case of doubt.
• Always check the surface
temperature of the seat before
any use.
• Always ensure that the head of
your child is supported in reclined
position.
• This child seat is not suitable for
use during sporting activities.
MAINTENANCE
• When cleaning the product, use only lukewarm
soapy water.
• If the seat has been involved in an accident, is
damaged, has fallen to the ground or if the
bicycle has fallen with the seat attached,
contact your dealer to check that it can still be
used. Damaged parts must always be replaced.
Contact your dealer if you are not sure how to
fit the new parts.
We wish you and your child many enjoyable
bicycle trips with your Hamax child seat!
Werbung
