Maintenance - Profitec Pro 600 Bedienungsanleitung

If you clean the brew group to often with cleaner, it may start squeaking. Don´t clean it to
often with cleaner, you will degrease all the moving parts and they will wear out quickly.
It´s better if you clean the brew group from time to time without cleaner.
Please find more information about how to program the group cleaning mode in chapter 6.3.3.
Caution!
Beware of hot water splashing while cleaning the group.
Empty the water drip tray regularly and do not wait until it is full in case the machine is not directly hooked
up to a water drainage.

7.3 Maintenance

Replacing the group gasket and the shower screen
Switch off the machine, disconnect the power cord and let the machine cool down.
Follow the steps as indicated below:
1
Brew group in the beginning,
lower view.
4
Remove the shower screen and
the gasket completely.
7
Insert the shower screen into
the brew group.
Translation of the original German user manual
2
Use a flat screwdriver to pry out
the shower screen and the
group gasket.
5
Keep the new spare parts ready
at hand (the rounded side of the
group gasket with ECM print
faced upwards to the brewing
group).
8
Take the portafilter without filter.
3
The shower screen and the
gasket are now nearly removed.
6
Clean the group with a brush.
Lock the shower screen firmly
into the gasket.
9
Clamp the portafilter into the
brew group.
ENGLISH
33