Invacare Aquatec Pure Bidet Gebrauchsanweisung Seite 10

Pure Bidet UM
NOTICE!
Wrong fluids or methods can harm or
damage the product.
— All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
— Never use corrosive fluids (alkalines, acid etc.) or
abrasive cleaning agents. We recommend an
ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
— Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic or
dissolves the attached labels.
— Always make sure that the product is completely
dried before taking into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
6.1.1 Cleaning Intervals
NOTICE!
Regular cleaning and disinfection enhance smooth
operation, increases the service life and prevents
contamination.
Clean and disinfect the product:
— regularly while in use,
— before and after any service procedure,
— when it has been in contact with any body fluids,
— before using it for a new user.
6.1.2 Cleaning Instructions
DANGER!
Electric shock hazard
— Observe safety information for electrical safety,
see 2.1 General Safety Information, 2.
— Do not use high pressure or steam cleaners /
autoclave.
— Do not touch the power socket with wet hands.
— Make sure that no water splashes to the plug or
the wall outlet.
Cleaning the Shower Toilet
1. Disconnect the power plug from the wall outlet before
cleaning the unit.
2. Clean the unit with moist, well-wrung soft cloth. For
excessive stains, use soft cloth moistened with mild
detergent solution.
3. Wipe out the device with a dry cloth.
Cleaning the Water Strainer
1. Close the water supply by turning the shut off valve
clockwise.
2. Detach the PVC flexible hose A from the inlet adapter B.
3. Detach the strainer C from the inlet adapter with a
pointed object.
4. Thoroughly clean the strainer with a soft brush.
5. Reinsert the strainer on the inlet adapter.
10
6. Attach the PVC flexible hose to the inlet adapter.
7. Open shut off valve fully by turning counterclockwise.
Cleaning the Nozzles
1. Press "CLEANSING / STOP" and "POWER SAVING" buttons
simultaneously on the control panel.
The nozzle A comes out and stops.
l
2. Clean the nozzle manually with a soft brush.
3. Press "CLEANSING / STOP" button.
The nozzle returns to its storage position and the self
l
cleaning function is automatically activated.
6.1.3 Disinfection Instructions
Method: Follow the application notes for the used disinfectant
and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
7 After Use
7.1 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
Inspection
l
Cleaning and disinfection
l
For detailed information, see 6 Maintenance and Servicing, 9.
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
7.2 Disposal
WARNING!
Environmental Hazard
Device contains batteries.
This product may contain substances that could be
harmful to the environment if disposed of in places
(landfills) that are not appropriate according to
legislation.
— DO NOT dispose of batteries in normal
household waste.
— DO NOT throw batteries into a fire.
— Batteries MUST be taken to a proper disposal
site. The return is required by law and free of
charge.
— For information on the battery type see battery
label or 9.1 General Data, 11.
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
1590625-I