Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Sauna Operation - Sentiotec Ck 3 Gebrauchsanweisung

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

Sauna operation
7
Automatic operation
7.1
Switching on the sauna control
1. Press ON/OFF 1.
-
The LEDs C - F light up for approx. 5 seconds.
-
The LED of the previously selected bath, SAUNA
H or CLIMATE A lights up.
-
The display 6 indicates the current time
(e.g.16:30 hours):
16:30
7.2
Setting to sauna operation
1. Press Sauna H.
-
The LED of Sauna H lights up.
-
The display 6 indicates the current time.
The LED AUTOMATIC 5 does not light up.
-
7.3
Select the start of heating [00:00 - 23:59
hours]
WARNING - Fire hazard:
Prior to turning the sauna control to auto-
matic operation make sure that no com-
bustible objects have been placed on top
of the stove.
1. Press UP/DOWN buttons 8 until LED START F
lights up:
The display 6 indicates:
OFF
or the value set previously.
2. Press PROG/OK 9:
-
The display 6 flashes:
OFF
or the value set previously.
3. Use the UP/DOWN buttons 8 to enter the desired
value, e.g. [18:00].
The display 6 flashes:
-
18:00
Operating instructions for the user 9
Sauna operation
7
Automatic operation
Continued
4. Press PROG/OK 9:
-
The display 6 indicates:
18:00
The LED AUTOMATIC 5 lights up.
-
-
The automatic start time for heating has been set.
Note - Deactivating the start of heating:
Turn ON/OFF switch 1 off and on again to deactivate
the automatic start of heating. The LED AUTOMATIC
5 goes out or
press the operating mode SAUNA H or CLIMATE A
again. The LED AUTOMATIC 5 goes out.
7.4
Entering the heating duration (00:00 -
06:00)
1. Press UP/DOWN buttons 8 until the LED TIME
E lights up:
-
The display 6 indicates (in standby):
STOP
-
or the remaining operating time while in heating
operation.
2. Press PROG/OK 9:
The display 6 flashes:
-
06:00
or the value set previously.
3. Use the UP/DOWN buttons 8 to enter the desired
value, e.g. [02:30].
The display 6 flashes:
-
02:30
4. Press PROG/OK 9:
The display 6 indicates (in standby):
-
STOP
or the new heating duration entered during hea-
ting operation.
-
The heating duration has been set.
47

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis