Feedback Messages With Occurring Errors - Sentiotec Ck 3 Gebrauchsanweisung

Installation instructions for trained electricians only
7 Feedback messages of occur-
ring errors
Dear Fitter,
Should, against expectations, reason for complaints
regarding this unit arise, we ask you to please describe
the error as accurately as possible to allow for spee-
dy repair processing.
For every returned control please always include the
temperature sensor(s).
Error messages in the display mean:
Err1: Overtemperature fuse in stove sensor FI is
defective
short in line / break in
line
Err2: Internal error of the control
(return control)
Err3: Break in sensor line F I
Err4: Short circuit in line F I
Err5: Short circuit in line(s) F II / FTS II
(temperature sensor)
Err6: Line interruption F II / FTS II
(temperature sensor)
Err7: Line interruption FTS II
(humidity sensor technology)
Err8: Short circuit in line FTS II
(humidity sensor technology)
7 Continued
Error description:
The selected temperature is not kept constant.
Control unit can not be programmed as intended.
Start-time function
Error occurs right after start-up
Determined system deviation (in degrees)
Disturbing noise from the control
Light or speed control function is defective
Error number indicated in display
Error occurs after it has been turned on for a while.
Selected humidity is not kept constant.
Miscellaneous:
______________________________________
______________________________________
______________________________________
______________________________________
37