Werbung
EN
The direction of travel is determined with the operating control shifter. Depending on the position of the
control shifter, the plate compacts in forward direction, on the spot or in reverse direction.
F – FORWARD
R – REVERSE
N – NEUTRAL
To make the compactor move in the forward direction, push the shift stick forward.
If shift stick is placed in the neutral position, the compactor will vibrate on the spot.
To make the compactor move in the reverse direction, pull the shift stick backwards.
5.3.3.
Compaction
Do not operate plate on concrete or on extremely hard, dry, compacted surfaces. The plate will jump
rather than vibrate and could damage both plate and engine.
The number of passes required to reach a desired compaction level will depend on the type and moisture
content of soil. Maximum soil compaction has been reached when excessive kickback is noticed.
When traveling backwards, the operator has to guide the vibration plate laterally by its guide handle so that
you will not be squeezed between the handle and a possible obstacle. Special care is required when
Werbung
