Werbung
Running the engine with dirty oil can cause premature engine wear and failure. Changing oil regularly is
extremely important. The flexible oil drain hose is equipped to drain oil into appropriate receptacle.
5.3.
Operation
5.3.1.
Adding fuel
Fill the fuel tank as instructed in the separate Engine Manual packed with the plate compactor. A more
detailed description of the engine operation and all related precautions and procedures can be found in the
Engine Manual packed separately with the unit.
5.3.2.
Starting Engine
Move the fuel valve lever to the ON position.
To start a cold engine, move the choke to the CLOSE position.
To restart a warm engine, leave the choke lever in the OPEN position.
Move the throttle lever away from the SLOW position, about 1/3 of the way toward the FAST position.
Place the shift stick in the neutral position.
Turn the engine switch to the ON position.
Operate the starter.
Recoil starter
Pull the starter grip lightly until you feel resistance, then pull briskly, return the starter grip gently. If the
choke lever has been moved to the CLOSE position to start the engine, gradually move it to the OPEN
position as the engine warms up. After engine warms up, pull throttle lever to accelerate engine speed and
place the shift stick at the desired position. Plate will begin vibrating and proceed with compacting.
Forward and reverse motion
EN
Werbung
