GE Ettan IPGphor 3 Sicherheitshandbuch Seite 16

1
Safety information
16
1.5 Labels and indicators
1.5.1 Rating label
The rating label (see figure below) is located on the instrument´s rear panel.
/
L
1.5.2 Safety label
Safety labels (see figure below) are attached to both the light protective cover and
the transparent lid of the safety lid. The safety label warns the user of risk for
personal injury. Do not proceed until the instructions are clearly understood and
all stated conditions are met.
1.5.3 Indicator and switch on the instrument unit
The Ettan IPGphor 3 instrument is equipped with the following indicator and
switch:
Indicator/Switch
HV ON
(indicator lamp)
Power
(switch)
Color Description
Green The HV ON lamp indicates that the high
voltage power supply is on and isoelectric
focusing is in progress. This lamp is not
illuminated during the rehydration phase of a
protocol.
Switches on/off power to the instrument.
–
Located on the rear panel, see Fig 1-2.
Ettan IPGphor 3 Safety Handbook 11-0034-61 Edition AB