Ettan IPGphor 3 Safety Handbook 11-0034-61 Edition AB
1.6
Emergency procedures
1.6.1
Emergency shutdown
In a situation where there is a risk of injury, turn off the mains power by switching
the mains power switch (located on the rear panel) to position 0.
Fig 1-2. Mains power switch on the rear panel.
1.6.2
Power failure routine
In the event of a power failure, the run is interrupted in an undefined state.
1.6.3
Restart procedure
In the event of system shutdown due to power failure, emergency stop or process
interruption, malfunctions must be rectified before the Ettan IPGphor 3 is
restarted.
To restart Ettan IPGphor 3, follow the start-up instructions in Ettan IPGphor 3
Instrument User Manual.
1.6.4
Replacing fuses
Refer to instructions in Ettan IPGphor 3 Instrument User Manual.
Safety information
/
L
The mains
power switch
1
17