Cleaning - SRAM i-Brake Betriebsanleitung

M A I N T E N A N C E A N D C A R E
C L E A N I N G
Under normal circumstances, your
i-BRAKE is maintenance-free and
well-protected against external
environmental influences.
To avoid malfunctions caused
2
by water entering the compo-
nents, you should not use high-
pressurized water for cleaning
(i.e. high-pressure cleaners or
strong water jets).
» Do not use any agressive
cleansers, gasoline, petroleum or
similar for cleaning.
» After cleaning your bicycle, you
should do a test braking so that
any moisture in the brake
system can be eliminated.
» During the winter season, you
should clean your bicycle in
shorter intervals so that winter
road salt cannot cause any
damage.
i-BRAKE · April 2004
2
The complete brake anchor
plate absolutely must be
replaced by a qualified specialist if
oil or other greasy substances have
contaminated the brake lining. An
oily brake lining reduces the braking
performance up to a complete brake
failure. Accidents with serious
injuries may result.
E
7