ATH-Heinl Matrix Lift 2.65 Bedienungsanleitung Seite 140

4 MAINTENANCE
To ensure safe operation of the machine, the user is obliged to maintain the machine regularly.
Repair work may only be carried out by authorized service partners or by the customer after consultation with
the manufacturer.
Warning
Before maintenance and repair work must:
Disconnect the machine from ALL power supplies.
Switch off the main switch or disconnect the power plug and, if necessary, release the
compressed air from the system.
Suitable measures must be taken to prevent the machine from being switched on again
Warning
Work on electrical elements or on the supply line may only be carried out by qualified persons
or electricians.
4.1 Consumables for assembly, maintenance and care
Hydraulic oil
Minimum requirement
Eni PRECIS HVLP-D Part No.: 090536 (20 liters) 90537 (10 liters)
Summer
Winter
Preservative for ropes, welds, screws, corners, edges and cavities
Minimum requirement
Würth protective wax spray
Lubricant for slideways
Minimum requirement
LAGERMEISTER WHS 2002 White EP high-performance grease
Lubricant for bushings, chains, rollers & moving parts
Minimum requirement
White Ultra Luber spray can
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
140
(10° to 45°)
(below 10°)
400 ml
500 ml
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
HVLP-D 32 (e.g.: Eni PRECIS HVLP-D)
HVLP-D 22 (e.g.: Eni PRECIS HVLP-D)
Item no.: 90534
Item no.: 90530
Item no.: 34403