ATH-Heinl Matrix Lift 2.65 Bedienungsanleitung Seite 126

2. Lay another electric cable from the power pack over the crossbar to the solenoid valve of the cylinder of
secondary column B and connect it there.
3. Check the connection for functionality.
Connecting the solenoid
1. Connect the electric cable to the solenoid of main column A.
2. Lay another electric cable from the power unit via the crossbar to the electromagnet of secondary column B
and connect it there.
3. Check the connection for functionality.
Connecting the optional upper limit switch
Attention
The following steps 1-3 must ALWAYS be carried out to prevent a short circuit in the
electronics!
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
126
A
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
B