90°
Installation angle ATH Matrix Lift 2.75XL
5. Tighten the screws of the crossbar.
6. Anchor the columns with dowels.
Use the base plate of the column as a drilling guide.
The cover of the hydraulic unit and the oil tank must be removed in order to drill and tighten the middle
hole of the base plate.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
90°
119