ATH-Heinl Matrix Lift 2.65 Bedienungsanleitung Seite 112

2.9.2 Mounting the ATH Matrix Lift 2.65
Positioning and aligning the lifting columns
1. Before setting up the columns, attach the column raisers.
5
4
Column extension
M12 washer
M8x20 screw
Remove the column extension from the packaging, taking care not to damage the paintwork.
Select the height you require from the 3 height settings (final height 5850 mm, 5600 mm, 5350 mm).
Place the column extension on the column and secure it in the desired position with M12 washers and
M12x35 screws.
Tighten the screws carefully.
2. After setting up the columns, check the distance between them by attaching the crossbar before doweling.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
112
1
2
6
3
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
M12x35 screw
Column
Mounting bracket for control valve