Herunterladen Diese Seite drucken

ATH-Heinl Matrix Lift 2.65 Bedienungsanleitung Seite 133

2-säulen-hebebühne

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
3.2
Basic notes
The machine may only be operated independently by persons who have reached the age of 18, who have
been instructed in the operation of the machine and who have proven their qualification to the employer.
They must be expressly authorized by the employer to operate the machine. The order to operate the
machine must be given in writing.
The machine may only be used for its intended purpose.
Always use specified material for assembly and operation.
Before assembly or disassembly, check all components; they must not show any signs of damage.
If necessary, follow the manufacturer's special instructions for the assembly or disassembly of vehicle-
specific work.
An important part of the guarantee / warranty is the fulfillment of the maintenance schedule. In particular, the
cleanliness, corrosion protection, control if necessary immediate repair of damage.
During operation, you should always watch out for hazards. As soon as hazards occur, immediately switch off
the machine, remove the power plug and disconnect the air supply. Then contact your dealer.
All warning signs must always be clearly legible. If they are damaged, they must be replaced immediately.
Danger
Pay attention to possible shearing points on the machine.
Caution
During operation, the noise level can reach 85dB (A), so the operator should take
appropriate protective measures.
Danger
Moving parts of the machine can catch loose clothing, long hair or jewelry.
3.3
Operating the lifting platform
Preparations
Attention
Read all safety instructions carefully before operating the lift.
1. Lower the lift completely until the support arm locks are deactivated.
2. Position the lift arms parallel to the direction of travel.
3. Drive the vehicle between the pillars, paying attention to the
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
"Load distribution"
pay attention.
133

Werbung

loading

Diese Anleitung auch für:

Matrix lift 2.75xl