ATH-Heinl Matrix Lift 2.65 Bedienungsanleitung Seite 122

2.9.5 Installing and adjusting the safety catches
A1
A2
Attach all safety catches and magnets as follows:
Ensure that the distance from the column to the lift truck A1 and the distance from the column to the unlocked
safety catch A2 is the same. If necessary, the distance can be adjusted using the nut on the electromagnet.
2.9.6 Installing hydraulic hoses
Attention
To prevent damage to the hoses, make sure that they are not installed close to moving parts
when laying the hydraulic hoses.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
122
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG