ATH-Heinl Matrix Lift 2.65 Bedienungsanleitung Seite 125

Connecting the oil return line
1. Connect the return line to the top of the cylinder of secondary column B.
2. Route the oil return line on the secondary column upwards, over the crossbar to the cylinder of main column
A.
3. Connect the return line to the T-piece on the top of the cylinder of main column A.
4. Route the return line from the T-piece to the connection on the unit.
5. Check that the connections are properly seated to avoid leaks.
6. Check that the hose is laid correctly to avoid damage.
2.9.7 Installing electrical connections
Connecting the control valves
1. Connect the electric cable from the power pack to the solenoid valve on the top of the main column A
cylinder.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
B
B
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
A
A
125